animal waste incinerator IncinerPro i75

The smallest model in the “i” range (incinerators with fixed main combustion chamber) is recommended for the incineration of small volume waste (e.g. layers, birds, other animals of similar size).



  • the incinerator is equipped with 2 combustion chambers (main and post-combustion), in order to be fully consistent with the requirements of the EC Regulation 1069/2009 and EU 142/2011

  • 2 independent burners, one in each combustion chamber

  • The gas resulting from the combustion process is kept at a minimum of 850 ° C fot 2 seconds

IncinerPro i75
Primary chamber volume 0,15 m³
Load capacity up to 75 kg
Burn rate up to 50 kg/h
Gas retention time min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h) 1,3 x 1,1 x 2,7
Weight 0,95 tones

For up-to-date technical details please request an Offer

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

animal waste incinerator IncinerPro i75