IncinerPro i2000 is one of the largest models in the standard range of incinerators with the main fixed combustion chamber.

It is a recommended equipment for the incineration of large volumes of waste even cattle or equine carcasses.

 

AS STANDARD EQUIPPED WITH:

OPTIONALS:

IncinerPro i2000
Loading method	up
Primary chamber volume (total/above concrete grid)	5,5 m³ / 3,9 m³
Load capacity	up to 2.000 kg
Burn rate	up to 250 kg/h
Gas retention time	min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h)	4,5 x 3,3 x 3,4
Weight	cc. 15,0 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

The IncinerPro i1750 is one of the largest model in the standard range of incinerators with the main fixed combustion chamber.

It is a recommended equipment for the incineration of large volumes of waste even cattle or equine carcasses.

 

AS STANDARD EQUIPPED WITH:

OPTIONALS:

IncinerPro i1750
Loading method	up
Primary chamber volume (total / above concrete grid (if exists))	3,73 /2,68 m³
Load capacity	up to 1.750 kg
Burn rate	up to 150 kg/h
Gas retention time	min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h)	4,5 x 3,1 x 2,4
Weight	5,3 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

The IncinerPro i1000 model is part of the incinerator range with the main fixed combustion chamber and is recommended for the incineration of medium and high volume waste (e.g. sheep, pigs, slaughterhouse and meat processing plants waste etc.).

 

AS STANDARD EQUIPPED WITH:

OPTIONALS:

IncinerPro i1000
Loading method	up
Primary chamber volume	1,86 m³
Load capacity	up to 1.000 kg
Burn rate	up to 150 kg/h
Gas retention time	min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h)	4,5 x 3,1 x 2,4
Weight	5,3 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

The IncinerPro i850 is part of the range of incinerators with the main fixed combustion chamber and is recommended for incineration of medium and high volume waste, especially waste with higher humidity load or lower calorific power (e.g. chicken, from slaughterhouse and meat processing plants etc.).

 

AS STANDARD EQUIPPED WITH:

OPTIONALS:

IncinerPro i850
Loading method	up
Primary chamber volume	1,24 m³
Load capacity	up to 850 kg
Burn rate	up to 150 kg/h
Gas retention time	min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h)	4,5 x 3,1 x 2,4
Weight	6,05 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, age, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

The IncinerPro i500 is part of the range of incinerators with the main fixed combustion chamber and is recommended for the incineration of medium volume waste (e.g. chicken, pets, sheep, pigs (including sows), slaughterhouse, meat processing plant etc.) .

 

AS STANDARD EQUIPPED WITH:

OPTIONALS:

IncinerPro i500
Loading method	up
Primary chamber volume	1,3 m³
Load capacity	up to 500 kg
Burn rate	Equipment variants depending on the applied legislation: up to 50 kg/h up to 100 kg/h (non-EU clients)
Gas retention time	min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h)	4,5 x 1,75 x 2,35
Weight	4,4 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

The IncinerPro i400 is part of the range of incinerators with the main fixed combustion chamber and is recommended for the incineration of small and medium volume waste (e.g. birds, pets, sheep, pigs, smaller quantity of  slaughterhouse or from meat processing plants etc.).

 

AS STANDARD EQUIPPED WITH:

OPTIONALS:

IncinerPro i400
Loading method	up
Primary chamber volume	0,67 m³
Load capacity	up to 400 kg
Burn rate	Up to 80 kg/h
Gas retention time	min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h)	2,85 x 1,56 x 3,28
Weight	3,51 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, waste’s age, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

The IncinerPro i200 model is part of the incinerator range with the main fixed combustion chamber and is recommended for the incineration of small and medium volume waste (e.g. birds, pets, sheep, young pigs, small quantities of wastes from slaughterhouse or meat processing plants activities etc.).

 

AS STANDARD EQUIPPED WITH:

OPTIONALS:

IncinerPro i200
Loading method	up
Primary chamber volume	0,55 m³
Load capacity	up to 200 kg
Burn rate	up to 50 kg/h
Gas retention time	min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h)	2,25 x 1,56 x 3,28
Weight	3,43 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, waste’s age, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

The IncinerPro i150 is part of the range of incinerators with the main fixed combustion chamber and is recommended for the incineration of small volume waste (e.g. chickens, layers, hens, pets or other animals of similar size).

 

AS STANDARD EQUIPPED WITH:

OPTIONALS:

IncinerPro i150
Loading method	up
Primary chamber volume	0,27 m³
Load capacity	up to 150 kg
Burn rate	up to 50 kg/h
Gas retention time	min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h)	1,6 x 1,25 x 3,0
Weight	1,7 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, waste’s age, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

The smallest model in the “i” range (incinerators with fixed main combustion chamber) is recommended for the incineration of small volume waste (e.g. layers, birds, other animals of similar size).

 

AS STANDARD EQUIPPED WITH:

IncinerPro i75
Primary chamber volume	0,15 m³
Load capacity	up to 75 kg
Burn rate	up to 50 kg/h
Gas retention time	min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h)	1,3 x 1,1 x 2,7
Weight	0,95 tones

For up-to-date technical details please request an Offer

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).