Portfolio | IncinerPro https://incinerpro.com Incinerators Mon, 05 Dec 2022 12:26:36 +0000 en-GB hourly 1 https://wordpress.org/?v=5.2.21 Mobile Incinerator IncinerPro a500 https://incinerpro.com/products/mobile-incinerator-incinerpro-a500/ Fri, 02 Sep 2022 11:41:25 +0000 https://incinerpro.com/?post_type=dt_portfolio&p=3880 Mobile incinerator (mounted on trailer) intended for the disposal of animal waste. This mobile incinerator is FULLY EQUIPPED for rapid field interventions.

The post Mobile Incinerator IncinerPro a500 first appeared on IncinerPro.]]>

Mobile incinerator (mounted on trailer) intended for the disposal of animal waste. This mobile incinerator is FULLY EQUIPPED for rapid field interventions:

  • 2 combustion chambers (fixed primary waste combustion chamber + post-combustion chamber for combustion of gases)
  • 2 fully automated, independent burners (1 in the main combustion chamber and 1 in the post-combustion chamber)
  • Diesel tank (optional)
  • Electricity generator (diesel)
  • Visual and audible alarm system
  • Control panel with touch-screen technology
  • Automated programming and control system for combustion parameters and cycles
  • Separate door for removing ash
  • Refractory insulation (for temperatures up to 1,500 ° C)
IncinerPro a2000
Loading method up
Primary chamber volume 0,5 m³
Load capacity
up to 200 kg
Burn rate
up to 50 kg/h
Gas retention time min. 2 sec. at min. 850 °C
Trailer type > 3,5 tones, 2 axes

For up-to-date technical details please request an Offer

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

 

IncinerPro mobile incinerators from the “a” range, fixed on the trailer, are homolagated by Romanian Automotive Register as a “mobile incinerator“.

All models are equipped with the post-combustion chamber and comply with the EC Regulations 1069/2009 (of the European Parliament and of the Council) and the EU Implementing Regulation no. 142/2011 (of the commission). For the non-EU market, models with equipment and personalized performances can be delivered according to the specific legislation, special requirements.

The post Mobile Incinerator IncinerPro a500 first appeared on IncinerPro.]]> Incinerator IncinerPro i2000 https://incinerpro.com/products/incinerator-incinerpro-i2000/ Thu, 13 Feb 2020 14:35:46 +0000 https://incinerpro.com/?post_type=dt_portfolio&p=3364 With up to 6 burners and 3 ash doors, IncinerPro i2000 is one of the largest models of IncinerPro animal waste incinerators with stationary main combustion chamber. We recommend it for incineration of large volume wastes (e.g. big animals such as cattle, horses), slaughterhouses.

The post Incinerator IncinerPro i2000 first appeared on IncinerPro.]]>

IncinerPro i2000 is one of the largest models in the standard range of incinerators with the main fixed combustion chamber.

It is a recommended equipment for the incineration of large volumes of waste even cattle or equine carcasses.

 

AS STANDARD EQUIPPED WITH:

  • 2 combustion chambers (main and post-combustion), in order to be fully consistent with the requirements of EC Regulation 1069/2009 and EU 142/2011
  • Standard 6 fully automated, independent burners (5 in the main combustion chamber and 1 in the post-combustion chamber). It can be equipped with concrete heart grid, for burning the waste even from bellow. 
  • Control panel with touch-screen technology

  • Automated programming and control system for combustion parameters and cycles

  • Visual and audible alarm system

  • Refractory concrete resistant to high temperatures (1,500 °C)
  • Thermo-couples for keeping temperatures at programmed values
  • Double ventilated chimney

  • 1 large door for loading the waste, with winch and safety system against accidental closing
  • 3 wide door for removing the ash

OPTIONALS:

  • Heat recovery

IncinerPro i2000
Loading method up
Primary chamber volume (total/above concrete grid) 5,5 m³ / 3,9 m³
Load capacity up to 2.000 kg
Burn rate up to 250 kg/h
Gas retention time min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h) 4,5 x 3,3 x 3,4
Weight cc. 15,0 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

Animal waste incinerator IncinerPro i2000
The post Incinerator IncinerPro i2000 first appeared on IncinerPro.]]> Incinerator IncinerPro r https://incinerpro.com/products/incinerator-incinerpro-r/ Tue, 09 Apr 2019 07:56:26 +0000 https://incinerpro.com?post_type=dt_portfolio&p=2775 Incinerator with main rotary combustion chamber, recommended for incineration of waste with a high amount of humidity or low calorific value (eg egg shells, etc.).

The post Incinerator IncinerPro r first appeared on IncinerPro.]]>

The IncinerPro r models are a range of incinerators with the main rotary combustion chamber and is recommended for the incineration of waste with a high amount of humidity or low calorific value (e.g. egg shells, slaughterhouse animal waste etc.).

AS STANDARD EQUIPPED WITH:

 

  • 2 combustion chambers (main and post-combustion), in order to be fully consistent with the requirements of EC Regulation 1069/2009 and EU 142/2011

  • The main combustion chamber is rotary, allowing the incineration of the waste with low calorific power, by its automatic mixing during the combustion process

  • Fully automated burners, independent, in each combustion chamber of the incinerator

  • Control panel with touch-screen technology

  • Automated programming and control system for combustion parameters and cycles

  • Visual and audible alarm system

  • Refractory concrete resistant to high temperatures (1,500 ° C)

  • Thermocouples for keeping temperatures at set values

  • Double ventilated chimney

  • Loading doors with safety system against accidental closing

OPTIONALS:

  • Automatic loading system with waste

IncinerPro i150
Loading method front
Primary chamber volume
Load capacity
Burn rate  depending on model, waste
Gas retention time min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h)
Weight

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, animal species and age, animal waste age, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

The post Incinerator IncinerPro r first appeared on IncinerPro.]]> Incinerator IncinerPro u – mounted on semi-trailer https://incinerpro.com/products/incinerator-incinerpro-u-semiremorca/ Tue, 12 Mar 2019 15:43:05 +0000 https://incinerpro.com?post_type=dt_portfolio&p=1914 IncinerPro mobile incinerators from the “u” range, fixed on the semi-trailer, are homologated "mobile incinerators" by Romanian Automotive Register, the whole assembly respecting the transport requirements on public roads.

The post Incinerator IncinerPro u – mounted on semi-trailer first appeared on IncinerPro.]]>

Incinerator mounted on homolagated by Romanian Automotive Register semi-trailer (towable by a compatible truck) fully equipped for rapid field interventions (eg fuel tank, current generator, light tower, etc.) and continuous use 24/24 hours.

Incinerators for emergency situations (IncinerPro u) are intended for:

  • Fast elimination of animal waste in the event of diseases outbreaks (e.g. avian influenza, swine fever), where the conventional methods and equipment are outdated as burning and loading capacities.
  • Keep a higher level of bio-security 
  • Fast animal waste incineration at the place where it was produced (animal farm, slaughterhouse, meat processing plants, etc)

Incinerators for emergency situations mounted on semi-trailers are FULLY EQUIPPED for rapid field interventions:

  • Mounted on 3 axle semi-trailer, homolagated by Romanian Automotive Register

  • Equipped with 2 combustion chambers (fixed primary waste combustion chamber + post-combustion chamber for gas combustion)

  • 5-7 fully automated, independent burners
  • Diesel tank

  • Electricity generator (diesel) for incinerator operation
  • Light tower (telescopic) with LED lamp, with its own electricity generator
  • Systems for automatic opening (electric) of the waste door

  • Visual and audible alarm system

  • Control panel with touch-screen technology

  • Automated programming and control system for combustion parameters and cycles

  • Doors for removing ash

  • Spare parts kit

  • Toolkit for quick interventions

  • Storage cabinet (for spare parts, tool kit, etc.)

  • Refractory insulation (for temperatures up to 1,500 ° C)

IncinerPro u7000
Loading method on top, mechanized
Primary chamber volume depending on the model, up to 7 m³
Load capacity depending on the model, up to 4,000 kg
Burn rate depending on the model
Gas retention time min. 2 sec. at min. 850 °C
Semi-trailer 3 fixed axis
Weight (semi-trailer assembly) cc. 32 tones (depending on the model, accessories, equipment)

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, animal species and age, animal waste age, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

IncinerPro mobile incinerators from the “u” range, fixed on the semi-trailer, are homolagated by Romanian Automotive Register, the whole assembly respecting the transport requirements on public roads in Romania, according to the Government Ordinance no. 43/1997 regarding the regime of roads, with subsequent modifications and completions, not being oversized.

The entire range of incinerators for emergency situations IncinerPro (eg: u7000, u6500, etc.) includes models equipped with the 2nd combustion chamber (post-combustion chamber) and in compliance with EC Regulations 1069/2009 (of the European Parliament and of the Council). ) and the EU Implementing Regulation no. 142/2011 (of the Commission).

Models mounted on semi-trailers are also available on the platform, for use in fixed places.

SemiTrailer High Capacity Incinerator
Mobile, autonomous animal waste incinerator
The post Incinerator IncinerPro u – mounted on semi-trailer first appeared on IncinerPro.]]> Incinerator IncinerPro u – on platform https://incinerpro.com/products/incinerator-incinerpro-u3500/ Tue, 12 Mar 2019 15:39:54 +0000 https://incinerpro.com?post_type=dt_portfolio&p=1910 IncinerPro incinerators from the "u" range, fixed on the platform, represent the professional solution when you want to eliminate large quantities of waste in a short time, but the capacity of destruction by conventional methods and equipment is outdated.

The post Incinerator IncinerPro u – on platform first appeared on IncinerPro.]]>

The incinerator for emergency situations, fixed on a metallic platform, is an equipment intended for situations in which the disposal of waste cannot be done in a short time by conventional methods and equipment. It is equipped for rapid field interventions and continuous use 24/24 hours.

Incinerators for emergency situations (IncinerPro u) are intended for:

  • Elimination of animal waste in the event of diseases outbreaks (e.g. avian influenza, swine fever)
  • Increased farm bio-security, when waste disposal capacity is exceeded by conventional methods

Incinerators for emergency situations mounted on PLATFORM are fully equipped for rapid interventions:

  • Equipped with 2 combustion chambers (fixed primary waste combustion chamber + post-combustion chamber for gas combustion)

  • 5-7 fully automated, independent burners
  • Diesel tank

  • Electricity generator (diesel) for incinerator operation
  • Light tower (telescopic) with LED lamp, with its own electricity generator
  • Systems for automatic opening (electric) of the waste door

  • Visual and audible alarm system

  • Control panel with touch-screen technology

  • Automated programming and control system for combustion parameters and cycles

  • Doors for removing ash

  • Spare parts kit

  • Trusa scule pentru interventii rapide
  • Storage cabinet (for spare parts, tool kit, etc.)

  • Refractory insulation (for temperatures up to 1,500 ° C)

IncinerPro u7000
Loading method on top, mechanized
Primary chamber volume depending on the model, up to 7 m³
Load capacity depending on the model, up to 4,000 kg
Burn rate depending on the model
Gas retention time min. 2 sec. at min. 850 °C
For up-to-date technical details please request an Offer
*Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, animal species and age, animal waste age, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

IncinerPro mobile incinerators from the “u” range, mounted on the platform, are the professional solution for situations where the rapid elimination of outbreaks of infection with conventional equipment cannot be achieved.

IncinerPro incinerators for emergency situations, from the “u” range, mounted on the flatfroma, are available and mounted on semi-trailers, the whole assembly being oversized and RAR approved for traffic on public roads.

The entire range of incinerators for emergency situations IncinerPro (eg: u7000, u6500, etc.) includes models equipped with the 2nd combustion chamber (post-combustion chamber) and in compliance with the EC Regulations 1069/2009 (of the European Parliament and of the Council ) and the EU Implementing Regulation no. 142/2011 (of the Commission).

 

For the non-EU market we also offer the incinerator variant for emergency situations equipped with 1 single combustion chamber (main combustion chamber).

Stationary high capacity animal waste incinerator
stationary animal waste incinerator IncinerPro
The post Incinerator IncinerPro u – on platform first appeared on IncinerPro.]]> Mobile Incinerator IncinerPro a2000 https://incinerpro.com/products/incinerator-mobil/ Tue, 12 Mar 2019 15:34:14 +0000 https://incinerpro.com?post_type=dt_portfolio&p=1908 Mobile incinerator (mounted on trailer) intended for the disposal of animal waste. This mobile incinerator is FULLY EQUIPPED for rapid field interventions.

The post Mobile Incinerator IncinerPro a2000 first appeared on IncinerPro.]]>

Mobile incinerator (mounted on trailer) intended for the disposal of animal waste. This mobile incinerator is FULLY EQUIPPED for rapid field interventions:

  • 2 combustion chambers (fixed primary waste combustion chamber + post-combustion chamber for combustion of gases)
  • 3 fully automated, independent burners (2 in the main combustion chamber and 1 in the post-combustion chamber)
  • Diesel tank (optional)
  • Electricity generator (diesel)
  • Light system
  • Visual and audible alarm system
  • Control panel with touch-screen technology
  • Automated programming and control system for combustion parameters and cycles
  • Separate door for removing ash
  • Refractory insulation (for temperatures up to 1,500 ° C)
IncinerPro a2000
Loading method up
Primary chamber volume 2,0 m³
Load capacity up to 1000 kg
Burn rate up to 150 kg/h
Gas retention time min. 2 sec. at min. 850 °C
Trailer type 7,5 tones, 2 axes

For up-to-date technical details please request an Offer

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

 

IncinerPro mobile incinerators from the “a” range, fixed on the trailer, are homolagated by Romanian Automotive Register as a “mobile incinerator“.

All models are equipped with the post-combustion chamber and comply with the EC Regulations 1069/2009 (of the European Parliament and of the Council) and the EU Implementing Regulation no. 142/2011 (of the commission). For the non-EU market, models with equipment and personalized performances can be delivered according to the specific legislation, special requirements.

The post Mobile Incinerator IncinerPro a2000 first appeared on IncinerPro.]]> Incinerator IncinerPro i1750 https://incinerpro.com/products/incinerator-incinerpro-i1750/ Tue, 12 Mar 2019 14:34:36 +0000 https://incinerpro.com?post_type=dt_portfolio&p=1894 IncinerPro i1750 is an animal waste incinerator with stationary main chamber, for big volumes of wastes. It is designed to work with 3 to 5 fully automatic burners and is having 2 ash doors. Perfect for animal farms with big amount of waste, as well as for slaughterhouses.

The post Incinerator IncinerPro i1750 first appeared on IncinerPro.]]>

The IncinerPro i1750 is one of the largest model in the standard range of incinerators with the main fixed combustion chamber.

It is a recommended equipment for the incineration of large volumes of waste even cattle or equine carcasses.

 

AS STANDARD EQUIPPED WITH:

  • 2 combustion chambers (main and post-combustion), in order to be fully consistent with the requirements of EC Regulation 1069/2009 and EU 142/2011

  • Standard 3 fully automated, independent burners (2 in the main combustion chamber and 1 in the post-combustion chamber). There is also the 1750 version with 5 burners (4 in the main chamber and 1 in the secondary combustion chamber)
  • The IncinerPro i1750G variant is equipped with 5 burners and grill on the inside, so it is especially recommended for slaughterhouse waste incineration.

  • Control panel with touch-screen technology

  • Automated programming and control system for combustion parameters and cycles

  • Visual and audible alarm system

  • Refractory concrete resistant to high temperatures (1,500 ° C)

  • Thermocouples for keeping temperatures at set values

  • Double ventilated chimney

  • 2 sliding doors, with safety system against accidental closing
  • Door for removing the ash

OPTIONALS:

  • Heat recovery

IncinerPro i1750
Loading method up
Primary chamber volume (total / above concrete grid (if exists)) 3,73 /2,68 m³
Load capacity up to 1.750 kg
Burn rate up to 150 kg/h
Gas retention time min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h) 4,5 x 3,1 x 2,4
Weight 5,3 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

Animal waste incinerator IncinerPro i1750
The post Incinerator IncinerPro i1750 first appeared on IncinerPro.]]> Incinerator IncinerPro i1000 https://incinerpro.com/products/incinerator-incinerpro-i1000/ Tue, 12 Mar 2019 14:30:17 +0000 https://incinerpro.com?post_type=dt_portfolio&p=1889 IncinerPro i1000 is a animal waste incinerator with stationary main combustion chamber, recommended for the incineration of medium and high volume waste (e.g. sheep, pigs, slaughterhouse, meat processing animal waste). 3 automatic burners.

The post Incinerator IncinerPro i1000 first appeared on IncinerPro.]]>

The IncinerPro i1000 model is part of the incinerator range with the main fixed combustion chamber and is recommended for the incineration of medium and high volume waste (e.g. sheep, pigs, slaughterhouse and meat processing plants waste etc.).

 

AS STANDARD EQUIPPED WITH:

  • 2 combustion chambers (main and post-combustion), in order to be fully consistent with the requirements of EC Regulation 1069/2009 and EU 142/2011

  • 3 fully automated, independent burners (2 in the main combustion chamber and 1 in the post-combustion chamber)

  • Control panel with touch-screen technology

  • Automated programming and control system for combustion parameters and cycles

  • Visual and audible alarm system

  • Refractory concrete resistant to high temperatures (1,500 ° C)

  • Termocuple pentru pastrarea temperaturilor la valorile stabilite
  • Double ventilated chimney

  • Winch waste loading door, with safety system against accidental closing.
  • Ash removal door

OPTIONALS:

  • Heat recovery

  • Mechanized loading system of the waste (container connected to the waste feed door, operated)

IncinerPro i1000
Loading method up
Primary chamber volume 1,86 m³
Load capacity up to 1.000 kg
Burn rate up to 150 kg/h
Gas retention time min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h) 4,5 x 3,1 x 2,4
Weight 5,3 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

Animal waste incinerator IncinerPro i1000 (pigs, chicken, sheep)
The post Incinerator IncinerPro i1000 first appeared on IncinerPro.]]> Incinerator IncinerPro i850 https://incinerpro.com/products/incinerator-incinerpro-i850/ Tue, 12 Mar 2019 14:28:04 +0000 https://incinerpro.com?post_type=dt_portfolio&p=1882 IncinerPro i850 is part of the range of incinerators with the main fixed combustion chamber. It is recommended for the incineration of medium and high volume wastes, especially wastes with higher humidity load or lower calorific power, e.g. chicken, slaughterhouse wastes etc.

The post Incinerator IncinerPro i850 first appeared on IncinerPro.]]>

The IncinerPro i850 is part of the range of incinerators with the main fixed combustion chamber and is recommended for incineration of medium and high volume waste, especially waste with higher humidity load or lower calorific power (e.g. chicken, from slaughterhouse and meat processing plants etc.).

 

AS STANDARD EQUIPPED WITH:

  • 2 combustion chambers (main and post-combustion), in order to be fully consistent with the requirements of EC Regulation 1069/2009 and EU 142/2011

  • 3 fully automated, independent burners (2 in the main combustion chamber and 1 in the post-combustion chamber)

  • Particular system for waste burning, including flame from below the waste. That is possible because of the concrete structure (grill) and the diametrically opposed burners, arranged at different heights.
  • Control panel with touch-screen technology

  • Automated programming and control system for combustion parameters and cycles

  • Visual and audible alarm system

  • Refractory concrete resistant to high temperatures (1,500 ° C)

  • Thermocouples for keeping temperatures at set values

  • Double ventilated chimney

  • Winch waste loading door, with safety system against accidental closing.
  • Ash removal door

OPTIONALS:

  • Heat recovery

IncinerPro i850
Loading method up
Primary chamber volume 1,24 m³
Load capacity up to 850 kg
Burn rate up to 150 kg/h
Gas retention time min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h) 4,5 x 3,1 x 2,4
Weight 6,05 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, age, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

The post Incinerator IncinerPro i850 first appeared on IncinerPro.]]> Incinerator IncinerPro i500 https://incinerpro.com/products/incinerator-incinerpro-i500/ Tue, 12 Mar 2019 14:23:17 +0000 https://incinerpro.com?post_type=dt_portfolio&p=1876 The IncinerPro i500 is an incinerator with stationary main combustion chamber. It is recommended for the incineration of medium volume waste (e.g. birds, pets, sheep, pigs (including sows), slaughterhouse waste etc.

The post Incinerator IncinerPro i500 first appeared on IncinerPro.]]>

The IncinerPro i500 is part of the range of incinerators with the main fixed combustion chamber and is recommended for the incineration of medium volume waste (e.g. chicken, pets, sheep, pigs (including sows), slaughterhouse, meat processing plant etc.) .

 

AS STANDARD EQUIPPED WITH:

  • 2 combustion chambers (main and post-combustion), in order to be fully consistent with the requirements of EC Regulation 1069/2009 and EU 142/2011

  • 2 fully automated, independent burners, one for each incinerator combustion chamber

  • Control panel with touch-screen technology

  • Automated programming and control system for combustion parameters and cycles

  • Visual and audible alarm system

  • Refractory concrete resistant to high temperatures (1,500 ° C)

  • Thermocouples for keeping temperatures at set values

  • Double ventilated chimney

  • Winch waste loading door, with safety system against accidental closing
  • Separate door for removing ash during burning

OPTIONALS:

  • Heat recovery

  • Front load variant (front) – IncinerPro i500H

IncinerPro i500
Loading method up
Primary chamber volume 1,3 m³
Load capacity up to 500 kg
Burn rate Equipment variants depending on the applied legislation:

  • up to 50 kg/h
  • up to 100 kg/h (non-EU clients)
Gas retention time min. 2 sec. at min. 850 °C
Overall dimensions (L x l x h) 4,5 x 1,75 x 2,35
Weight 4,4 tones

For up-to-date technical details please request an Offer

 

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

 

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).

Frontal loading animal waste incinerator IncinerPro i500
Animal waste incinerator IncinerPro i500
The post Incinerator IncinerPro i500 first appeared on IncinerPro.]]>