Mobile incinerator (mounted on trailer) intended for the disposal of animal waste. This mobile incinerator is FULLY EQUIPPED for rapid field interventions:

  • 2 combustion chambers (fixed primary waste combustion chamber + post-combustion chamber for combustion of gases)
  • 2 fully automated, independent burners (1 in the main combustion chamber and 1 in the post-combustion chamber)
  • Diesel tank (optional)
  • Electricity generator (diesel)
  • Visual and audible alarm system
  • Control panel with touch-screen technology
  • Automated programming and control system for combustion parameters and cycles
  • Separate door for removing ash
  • Refractory insulation (for temperatures up to 1,500 ° C)
IncinerPro a2000
Loading method up
Primary chamber volume 0,5 m³
Load capacity
up to 200 kg
Burn rate
up to 50 kg/h
Gas retention time min. 2 sec. at min. 850 °C
Trailer type > 3,5 tones, 2 axes

For up-to-date technical details please request an Offer

Burning rate, load capacity, fuel and current consumption are parameters that depend on the waste (type, volume, species, humidity, density, how it was mixed), incinerator loading mode, technical state of the burners and incinerator, fuel quality.

It is very important to understand that the burning rate is heavily influenced by many parameters. Because there are no 2 identical waste batches, the operator(s) must try to load a mixture of different animal wastes for a better incineration process.  A correct mixture of waste will ensure better burning rate and lower fuel consumption.

Please read the instructions carefully and follow our technical advice as much as possible. Burning process in an animal waste incinerator is different from burning process in a boiler (where only fuel is burned).


IncinerPro mobile incinerators from the “a” range, fixed on the trailer, are homolagated by Romanian Automotive Register as a “mobile incinerator“.

All models are equipped with the post-combustion chamber and comply with the EC Regulations 1069/2009 (of the European Parliament and of the Council) and the EU Implementing Regulation no. 142/2011 (of the commission). For the non-EU market, models with equipment and personalized performances can be delivered according to the specific legislation, special requirements.